Skip to content
ATR TECHNOLOGYElectrolytic capacitor manufacturing

Automotive electronics

ECU power inputs, 48 V modules and body electronics that must hold tolerance from −40 °C.

Automotive ECU circuit board with surface mount components

Electrical challenge

Under-hood assemblies see cold cranking, load dump and continuous thermal cycling. Capacitance drift and ESR rise are the failure modes that show up first in validation.

What to verify

  • Endurance at 125 °C and ripple derating above 105 °C.
  • Vibration and mechanical shock at the board mount.
  • Low-temperature ESR for cold-crank behaviour.

Start from the thermal position: engine-adjacent boards should be evaluated against 125 °C hybrid or automotive series, while cabin electronics can use 105 °C low-impedance parts. Where the rail carries high switching frequency, solid polymer parts remove the ESR temperature dependence that complicates cold-start validation.